Filter
Top Products
Recording pictures (basic)
41
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the
difference of brightness between the subject and the background.
Preparation
• Set the mode dial except for [ ]/[ ]. (P30)
1 Press 3 until [ EXPOSURE]
appears on the screen to
compensate the exposure.
• You can compensate from j2EV
to i2 EV in steps of 1/3 EV.
¬
Suggestions/Tips
¬
• EV is an abbreviation of Exposure
Value, and it is the amount of light
given to the CCD by the aperture
value and the shutter speed.
• The compensation range of the
exposure will be limited depending on
the brightness of the subject.
• The exposure compensation value
appears on the lower left of the
screen.
• The exposure value is memorized
even if the camera is turned off.
• You cannot compensate the exposure
in manual exposure.
EXPOSURE
SET
WB
R
E
V
I
E
W
SET
WB
R
E
V
I
E
W
SET
WB
R
E
V
I
E
W
EXITSELECT
FZ10-PP.book 41 ページ ２００３年１１月１８日 火曜日 午後１時７分