Recording
- 84 -
Applicable modes:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P158).
Press 4 ().
Touch burst icon ([ ], etc.).
Select and touch the burst speed.
¢1 Number of recordable pictures
¢2 Depending on the recording conditions, the number of frames in a burst may be reduced.
(For example, when [I.RESOLUTION] of the recording menu is set to [EXTENDED], the
number of frames in a burst may be reduced)
¢3 Pictures can be taken until the capacity of the card becomes full. However the burst speed
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture
size, the setting for the quality and the type of card used.
• The Burst Mode speed may become slower depending on the following settings.
–Focus Mode (P32)/[SENSITIVITY] (P108)/[PICTURE SIZE] (P138)/[QUALITY] (P139)/
[FOCUS PRIORITY] (P152)
• Burst speed can also be set with [BURST RATE] in [REC] Mode menu.
• Refer to P139 for information about RAW files.
[SH]
(Super high
speed)
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Burst speed
(pictures/second)
20 4.2 3 2
Live View during Burst
Mode
None None Available Available
¢1
With RAW files —
9
¢2, 3
Without RAW files Max. 40
Depends on the capacity of the card
¢3