Filter
Top Products
Preparation
17
Removing the Card
Preparation
• Check if the camera is turned off.
• Close the flash.
1 Slide the card door to open.
2 Push the card until it clicks then
pull the card out upright.
3 Close and slide the card door.
¬
Suggestions/Tips
¬
• The card and the data may be
damaged if it is removed while the
camera is on.
• If the card door cannot be completely
closed, remove the card and insert it
again.
• If the card cannot be fully inserted,
check the direction of the card.
• We recommend using Panasonic’s SD
Memory Card. (Use only the genuine
card.)
• The card may be damaged if it is not
fully inserted.
• Do not open the card door during
the access to the card. (P15)
LC1PP.book 17 ページ ２００４年１月２６日 月曜日 午後６時５０分