Filter
Top Products
Recording pictures (basic)
45
Taking Pictures Using the Built-in Flash
Preparation
• Set the operational mode dial except for [ ]. (P30)
ª To open the flash
Press the [ OPEN] button.
ª To close the flash
Press the flash until it clicks.
• Be sure to close the flash when not in
use.
ª Switching to the appropriate flash
setting
:AUTO
The flash is automatically activated
according to the recording condition.
: AUTO/Red-eye reduction
The flash is automatically activated
according to the recording condition.
It reduces the red-eye phenomenon
(eyes of the subject appear red in
photo flash) by lighting the flash
before the actual recording of the
picture.
Use this when you take pictures of
people in low lighting conditions.
: Forced ON
The flash is activated every time a
picture is recorded.
Use this when your subject is back-lit
or under fluorescent light.
: Forced ON/Red-eye reduction
The flash is activated every time a
picture is recorded.
Simultaneously it reduces the red-eye
phenomenon. Use this when your
subject is back-lit or under fluorescent
light.
: Slow sync.
When you take a picture with a dark
background landscape, it makes the
shutter speed slow when the flash is
activated, so that the dark
background landscape will become
bright.
: Slow sync./Red-eye reduction
When you take a picture with a dark
background landscape, this feature
makes the shutter speed slow when
the flash is activated, so that the dark
background landscape will become
bright. Simultaneously it reduces the
red-eye phenomenon.
Use this when taking pictures of
people with a dark background.
OPEN
1
2
REVIEWREVIEW
SETSELECT
LC1PP.book 45 ページ ２００４年１月２６日 月曜日 午後６時５０分