Filter
Top Products
Recording pictures (basic)
46
: Forced OFF
Even in dark places, the flash is not
activated.
Use this when taking pictures in
places where use of the flash is not
allowed.
• Refer to P72 for setting the 1st and
2nd curtain.
ª Available flash settings
¢When setting to the 2nd Curtain
Synchro, flash setting is not available.
ª The available flash range to take
pictures
• Refer to P37 for the focus range.
ª Adjusting flash output
Adjust the flash output when the subject
is small or reflection ratio is extremely
high or low.
1 Press [ ] until
[ FLASH] appears on the
screen to set the flash output.
• You can adjust this from j2EV to
i2 EV in steps of 1/3 EV.
• The determined flash output is
memorized even if the camera is
turned off.
ª Bounce Flash
Bounce flash is a technique which
reflects the light from the flash to ceiling
or a wall.
When you directly illuminate the front of
the subject, dark shadows may appear
±±±j
±° ±° ±° j
±±±±
±° ±° ±° ±°
±±jj
±° ±° j j
±±±±
ISO
sensitivity
Available flash range
ISO AUTO
1.64 feet
(50 cm)–15.8 feet
(4.8 m) (Wide)
1.64 feet
(50 cm)–13.1 feet
(4 m) (Tele)
ISO100
1.64 feet
(50 cm)–15.8 feet
(4.8 m) (Wide)
1.64 feet
(50 cm)–13.1 feet
(4 m) (Tele)
ISO200
2.3 feet
(70 cm)–22 feet
(6.7 m) (Wide)
2.3 feet
(70 cm)–18.4 feet
(5.6 m) (Tele)
ISO400
3.3 feet (1 m) – 31.2 feet
(9.5 m) (Wide)
3.3 feet (1 m) – 26.3 feet
(8 m) (Tele)
SET
FLASH
REVIEW
REVIEW
LC1PP.book 46 ページ ２００４年１月２６日 月曜日 午後６時５０分