Filter
Top Products
Preparation
18
Inserting/Removing the Card
Preparation
• Check that the camera is turned off and that the lens is retracted.
1 Slide the door in the direction of
the arrow to open the card door.
• The card may be damaged if it is
removed while the camera is on.
• We recommend using Panasonic’s SD
Memory Card. (Use only the genuine card.)
2 Insert the card all the way in until
it clicks.
• Insert the card, pressing gently until it
locks in place. If the card will not insert
freely, it may be reversed. Do not force
the card.
• Do not touch the connection terminals
on the back side of the card.
• The card may be damaged if it is not
fully inserted.
3 Close the card door.
• If the card door cannot be completely
closed, remove the card and insert it
again.
ª Removing the Card
When removing the card, press the card
until it clicks and then pull it out straight
from the camera.
¬
Suggestions/Tips
¬
• Do not remove the card when the
card is being accessed. (P17)
LC70_50GN.book 18 ページ ２００４年２月２０日 金曜日 午後１時５７分