Filter
Top Products
Recording pictures (basic)
37
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically recorded by each press of the shutter
button according to the compensation range of the exposure.
You can select the desired exposure among the 3 types of pictures.
Preparation
• Set the mode dial except for [ ]/[ ]/[ ]. (P8)
1 Select [ AUTO BRACKET] and
set the compensation range of the
exposure.
• You can select the exposure from
0 (OFF), n1/3 EV, n2/3 EV and
n1EV.
• When you do not use auto bracket,
select [OFF].
¬
Suggestions/Tips
¬
• When setting the auto bracket, the
auto bracket icon appears on the lower
left of the screen.
• Once you take a picture, auto bracket
will be cancelled automatically.
• When taking pictures using auto
bracket after the exposure
compensation, the pictures are based
on the compensated exposure.
When the exposure is compensated,
the compensated exposure value
appears.
• When the flash is activated, you can
take only 1 picture. Auto bracket
setting cannot be cancelled.
• When setting auto bracket, you cannot
take a picture with audio.
• When setting auto bracket and the
burst mode simultaneously, auto
bracket will be performed.
• The exposure may not be
compensated with auto bracket
depending on the brightness of the
subject.
AUTO BRACKET
EXITSELECT
WB
WB
WB
WB
2 times
LC70_50GN.book 37 ページ ２００４年２月２０日 金曜日 午後１時５７分