Filter
Top Products
Preparation
19
Setting the Date/Time (Clock Set)
ª Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on,
the clock setting screen appears.
When pressing the [MENU] button, the
screen shown in step 2 appears. Set the
clock on it.
1 Select [CLOCK SET] from the
[SETUP] menu. (P20)
2 Set date, time and order.
• 2/1: Select the desired item.
• 3/4: Set date and time.
• 3/4: Select [D/M/Y], [M/D/Y] or
[Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after
finishing the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
• You can set the year from 2000 to
2099. The 24-hour system is used.
ª Date Printing
• You can set the date printing in DPOF
print setting on this camera. (P68)
• Using the supplied software, [SD Viewer
for DSC], it is possible to have the date
imprinted on the picture. For details,
please read the supplied operating
instructions for PC connection.
• When you go to a photo studio for
printing, be sure to order the printing
of the date. For further information,
ask the photo studio. Depending on
the studio, it may not be possible to
print the date.
PLEASE SET THE CLOCK
MENU
CLOCK SET
REC SETUP
2/
3
USB MODE
NO.RESET
RESET
CLOCK SET
EXITSETSELECT
MENU
M
ass
S
torage
USB
WB
WBWB
CLOCK SET
D/M/Y
2004
MAR
.
11
.
10 00
:
EXITSETSELECT
MENU
WB WB
LC70_50GN.book 19 ページ ２００４年２月２０日 金曜日 午後１時５７分