Filter
Top Products
Playback (advanced)
86
Preparation
• Set the DPOF print with this camera in advance. (P65)
• Set the paper size and print quality with the printer. (Read the printer operating
instructions.)
• Connect the camera to a printer. (P84)
ª DPOF picture
1 Select [DPOF PICTURE].
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
• Press the [MENU] button, and you
can change the DPOF print
setting.(P65)
2 Select [YES] and print.
• Press the [MENU] button to cancel
printing.
• Refer to 87 for the date printing.
¬
Suggestions/Tips
¬
• When the total number of pictures
exceeds the following numbers, the
number of remaining pictures does not
appear on the screen.
• PictBridge Print: 1000 or more
• USB Direct-Print: 255 or more
When printing with PictBridge
• When connecting to a printer not
supporting DPOF, DPOF printing
cannot be set. (The DPOF print
selecting screen does not appear.)
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [ ] is indicated.
• When the [¥] indication lights in yellow
during printing, check if there is a
malfunction on the printer.
SINGLE
PICTURE
DPOF
PICTURE
SETSELECT
PictBridge
WB
WB
DATE
DISPLAY
SELECT SET
PLS CHECK THE PRINTER
START PRINTING?
YES NO
PictBridge
WBWB
LC70_50GN.book 86 ページ ２００４年２月２０日 金曜日 午後１時５７分