Filter
Top Products
Preparation
19
VQT0P65
Inserting/Removing the Card (Optional)
• Check that the camera is turned off and
that the lens is retracted.
• Prepare SD Memory Card (optional) or
MultiMediaCard (optional).
• When you do not use the card, you can
record or play back pictures on the
built-in memory. (P20)
1 Slide the card door to open it.
• The card and the data may be
damaged if it is inserted or removed
while the camera is on.
• We recommend using Panasonic’s SD
Memory Card. (Use only the genuine
SD card with SD Logo.)
2 Insert:
Insert the card fully until it clicks
and it is locked with the label
facing the back of the camera.
Remove:
Push the card until it clicks, then
pull the card out upright.
• Check the direction of the card.
• Do not touch the connection terminals
on the back side of the card.
• The card may be damaged if it is not
fully inserted.
3 1 Close the card door.
2 Slide the card door to the end
and then close it firmly.
• If the card door cannot be completely
closed, remove the card and insert it
again.
LZ2_1PP.book 19 ページ ２００５年１月１４日 金曜日 午前７時５６分