Filter
Top Products
Playback (advanced)
83
VQT0P65
• Usually, it is not necessary to format the
built-in memory and the card. Format
them when the message [BUILT-IN
MEMORY ERROR] or [MEMORY CARD
ERROR] appears.
• If the built-in memory or the card has been
formatted by a PC or other equipment,
format it on the camera again.
• Once the built-in memory or the card is
formatted, all data including protected
images are irretrievably erased. Please
confirm that all data is transferred to
your PC before proceeding with format
function.
• During formatting, do not turn the camera
off.
• When you format the built-in memory or
the card, use batteries with sufficient
battery power (P14) or AC adaptor
(DMW-AC1; optional).
• When the SD Memory Card Write-Protect
switch is slid to [LOCK], you cannot format
the card.
• It may take longer to format the built-in
memory than the card. (Max. about
15 sec.)
• If the built-in memory or the card cannot
be formatted, consult your nearest
servicenter.
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
LZ2_1PP.book 83 ページ ２００５年１月１４日 金曜日 午前７時５６分