Filter
Top Products
- 88 -
Recording
Switches the displaying and hiding of the location name information displayed on the
screen.
Select [Area Info. Set] from the [GPS/Sensor] menu. (P44)
Press 3/4 to select the item to change, and then press [MENU/SET].
Select [ON] for the items to display and [OFF] for the items not to
display by pressing
34 , and then press [MENU/SET].
Additionally register new landmarks in the database of this unit. It can be displayed on the
screen or stored as a positioning result once registered.
Select [My Landmark] from the [GPS/Sensor] menu. (P44)
Press 3/4 to select [None], and then press [MENU/SET].
• Confirmation screen is displayed. Positioning is started when [Yes] is selected.
• Current location information is displayed once the positioning is successful.
After confirming the GPS information, press [MENU/SET].
Enter landmark name.
• For details on how to enter characters, refer to “Entering Text” on P115.
∫ Change or delete registered landmark names
1 Select registered landmark name in above step 2, and then press [MENU/SET].
2 Press 2/1 to select [Edit] or [Delete], and then press [MENU/SET].
•
Text input screen is displayed when [Edit] is selected. Enter the landmark name again.
• The registered landmark is deleted when [Delete] is selected.
Note
•
Up to 50 landmarks can be additionally registered.
Switch between displaying and hiding the location name information
Register additional landmarks