Filter
Top Products
GPS/Sensor
- 130 -
When [ ] is displayed on the compass, perform [Calibrate compass].
1 Select [Calibrate compass] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2 Securely hold the unit vertically, and adjust by turning it
in a figure 8 a few times by rolling your wrist.
•
An adjustment completed message is displayed when the
adjustment is successful.
Note
•
Perform the adjustment with the strap around your wrist to avoid dropping the unit.
• If the adjustment fails, move to a location with no effect from surrounding magnetism, and
perform the adjustment again.
• If the compass cannot acquire directions due to the presence of an object nearby with a strong
magnetic field, etc., [ ] will be displayed.
Adjusting the compass