Filter
Top Products
GPS/Sensor
- 118 -
When the displayed location name information is different from the current location or
when the positioning is not successful, move to a location where the radio waves from
GPS satellites can be received better and perform the positioning update.
•
When significant time has elapsed since the last successful positioning ([ ], [ ], [ ] and
[ ] are displayed), we recommend performing a positioning update.
Select [Repositioning] on the [GPS/Sensor] menu, and then press [MENU/
SET].
• Positioning is started and the current location information is updated once the positioning is
successful.
• Positioning also can be updated by selecting [ ] from the Quick Menu (P48), and then
pressing [MENU/SET].
∫ Checking the GPS reception status before updating
1 Select [GPS Setting] on the [GPS/Sensor] menu, and then press [MENU/SET].
2 Press 3/4 to select [INFO] and then press [MENU/SET].
•
Last updated positioning result is displayed.
3 Press [MENU/SET] in the information confirmation screen.
•
Positioning is started and the current location information is updated once the positioning
is successful.
∫ About automatic updating of positioning
•
Even if you do not perform [Repositioning], it will perform the positioning automatically right
after the power is turned on, and in constant time intervals.
• When [GPS Setting] is set to [ON], the unit will continue to perform the positioning at a constant
time interval even if the power is turned off. Note that if [Airplane Mode] has been set to [ON],
positioning will not be performed when the power is turned off.
• Positioning with the power turned off is canceled in the following cases:
– When the remaining battery power becomes [ ]
– When the power is not turned on for a specific period of time
Update the GPS information
[]
Time positioning was performed
[]
Number of GPS satellites received from
[]
Latitude
Longitude