Panasonic DMC-TZ25 Camera Flash User Manual


 
- 73 -
Burst function
Note on the picture size setting
[Aspect Ratio]
4:3 3M, 2M, 0.3M 2.5M, 0.3M 3M
3:2 2.5M, 0.3M 3M, 0.3M 2.5M
16:9 2M, 0.2M 3.5M, 0.2M 2M
1:1 2.5M, 0.2M 2M, 0.2M 2.5M
Pictures taken with the or setting are recorded together as a group (burst
group). (→94)
Depending on changes in the brightness of the subject, the second and subsequent
pictures may be recorded brighter or darker when using the burst function at the ,
, or setting.
Burst speed may be reduced if shutter speed is reduced in darker locations.
The pictures taken using the burst function at the or setting may be distorted if
the subjects were moving or the camera was moved.
[Auto Bracket] is released.
The flash is set to [Forced Flash Off]. (However, when [Flash Burst] is selected,
the flash is fixed to [Forced Flash On].)
Settings will be stored even if power is turned off.
The burst function cannot be used in the following cases:
• [Creative Control] Mode ([Toy Effect] [Miniature Effect] [Soft Focus])
• Scene Modes ([Panorama Shot] [Handheld Night Shot] [HDR])
When the scene mode is set to [High Sens.], , or cannot be selected.
When [Selftimer] is set, 3 pictures are taken. (Except [Flash Burst])
It may take a while to store still pictures that were taken using the burst function.
You cannot use zoom during burst recording.