Filter
Top Products
13
(ENG) VQT4Q07
Fixing the Irradiation Angle
Point the flash head at a wall or ceiling for bounce flash
photography. The area illuminated at ranges of 0.5 m
(1.6 feet) to 1.0 m (3.3 feet) will not be correct; point the
flash down.
Pressing the bounce unlock button, turn the
light-emitting section up/down and left/right.
Using the Wide Panel
Use the built-in wide panel for flash photography when the
focal length of the lens is wider than 12 mm.
Slide out the wide panel and place it on the flash
head.
≥The estimated range display changes when the wide panel
is used.
≥The lighting angle can be set to 10 mm and 8 mm only.
≥Do not tilt the wide panel up.
≥The ZOOM display will blink if the lens has a focal length of
12 mm or more.
Using the Catch Light Plate
Reflecting the flash light allows you to shoot with the catch
light effect, which reflects light in the models eyes.
Slide out the catch light plate.
Point the flash directly upward with the plate toward the
subject.
Other Settings
The following options can be selected in the control panel.
1 Press the [OK] button.
An item will blink in the control panel.
2 Press 3/4/2/1 to highlight items.
3 Rotate the dial to select the setting,
and then press [OK] button.
90º
7º
180º
180º
VQT4Q07_PP_E_GK.book 13 ページ ２０１２年１０月２３日 火曜日 午前９時３９分