Filter
Top Products
VQT4Q07 (ENG)
14
Custom Settings
Customize settings for improved ease of use.
1 Press and hold the [OK] button for more than 2 seceonds.
The flash will enter custom settings mode.
2 Press 3/4 to highlight items.
3 Rotate the dial to change the highlighted item.
4 Press and hold the [OK] button for more than 2 seconds to
end the settings.
Option Description
MODE (flash mode) P10
(flash intensity adjustment) P11
ZOOM (lighting angle) P11
(LED light)
Choose whether the LED lights automatically
or manually.
[A]: Lights automatically as required.
[M]: Lights when the LED light button is
pressed.
None: Does not light.
GN (guide number) Adjust flash level.
ISO sensitivity Adjust ISO sensitivity.
Group Choose a group for [RC] mode. (P12)
Aperture Adjust aperture.
Channel Choose a channel for [RC] mode. (P12)
Control panel Option Description
AF assist
lamp
[A]: Controlled by camera.
[OFF]: Does not light.
LED
brightness
[1/1] to [1/16]: Adjust LED brightness.
Slave
flash
[ON]: Flash control display shows slave mode.
[OFF]: Flash control display does not show
slave mode.
Flash
cable
[ON]: Flash cable not used.
[OFF]: Flash cable used.
Zoom
display
[]:
Display values for FOUR THIRDS lenses.
None: Display 35 mm film camera equivalent
values.
VQT4Q07_PP_E_GK.book 14 ページ ２０１２年１０月２３日 火曜日 午前９時３９分