Panasonic GP-US932CUS Security Camera User Manual


 
Setup items Description Page
q CAMERA ID Specifies the camera title. Through this item, a camera title is created
with alphanumeric and symbol characters, and displayed on the
screen.
w ELC Specifies the ELC function.
e SHUTTER Specifies the electronic shutter speed.
r GAIN Adjusts the gain.
t SENS UP Specifies electronic sensitivity enhancement.
y OUTPUT SEL Specifies the output signal.
u SCENE FILE Registers the settings of details, gamma, hue, etc.
DTL MODE Specifies the details.
RED DTL Adjusts the enhancement of red edge.
GAMMA Performs gamma adjustment.
KNEE Adjusts the knee point.
BLACK STRETCH Toggles the black stretch function on and off.
D-RANGE Toggles the dynamic range between NORMAL and EXPAND.
WHITE CLIP Adjusts the white clip level.
FLARE COMP Performs flare compensation.
DNR Specifies the level of the digital noise reduction function.
MATRIX Adjusts the hue.
CHROMA GAIN Adjusts chroma gain.
TOTAL PED Adjusts the pedestal level.
i WHITE BAL Specifies white balance adjustment.
o BLACK BAL Adjusts the black balance.
!0 SYNC Specifies the synchronization type.
!1 ELECTRIC ZOOM Toggles the electronic zoom on and off.
!2 FREEZE Toggles the freeze function.
15
Setting Procedures
Performing each setting item on the SETUP menu should be completed in advance to use this unit. Perform the settings for
each item in accordance with the conditions of the camera shooting location.
Note:
In addition to the SETUP menu, this system has a simplified menu (SEL menu) that is displayed using the [SEL] button on
the front of the CCU. Refer to page 25 for further information about the SEL menu.
SETUP menu
The following items can be set with use of the SETUP menu.
17
18
19
19
19
19
20
20
20
20
21
21
21
21
21
21
21
22
22
23
23
24
24
24