Filter
Top Products
• Is the camera cable appropriately connected at both the
connector of the CCU and the connector of the camera
head?
Check whether the connection is appropriately established.
9
• Pressing once displays the state.
Press the [GAIN] button repeatedly until your target LED
lights.
9
26
• Are the cables appropriately connected to the video output
connector, S-VIDEO output connector, RGB/YPbPr output
connector, HDMI output connector, or SDI output connec-
tor, respectively?
Check whether each cable is appropriately connected.
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not
described below.
No image displayed
11, 12
Camera with no response to
the button operation on the
front face of the CCU
The lighting LED of the
[SCENE] button unchanged
The lighting LED of the [GAIN]
button unchanged
Only the color bar displayed
The hue [MATRIX] unad-
justable in the menu
• Is the function setup switch No. 4 set to "ON"?
Set the function setup switch No. 4 to "ON".
• Pressing once displays the state.
Press the [SCENE] button repeatedly until your target LED
lights.
• Is the monitor luminance appropriately adjusted, or is the
contrast appropriately adjusted?
Check whether the monitor settings are appropriate.
Troubleshooting
Symptom Cause/solution
Reference
pages
—
11
9
• Is the camera cable appropriately connected at both the
connector of the CCU and the connector of the camera
head?
Connection between the camera head and camera cable is
required to adjust the image quality.
Check whether the connection is appropriately established.
9