Filter
Top Products
The SEL menu is a simplified menu that can be called up
by pressing the [SEL] button while an image is displayed.
The following items can be set with use of the SEL menu.
• Image level [BRIGHTNESS]: Adjusts the brightness
(ELC, gain (AUTO), and the convergence level of elec-
tronic sensitivity enhancement (AUTO)).
• Red level [R-GAIN]: Adjusts the red level.
• Blue level [B-GAIN]: Adjusts the blue level.
• Edge enhancement level [DTL-LEVEL]: Adjusts the
edge enhancement level.
• Electronic zoom [ZOOM]: Adjusts the zoom factor.
• Detection area [AREA]: Specifies the detection areas of
ELC, gain (AUTO), and electronic sensitivity enhance-
ment (AUTO).
■ How to display or operate the SEL
menu
z Press the [SEL] button.
→ The SEL menu appears.
x Press the [SEL] button to call up the screen of the item
to be changed.
c Use of the [e] or [f] button allows users to adjust the
setting.
Notes:
• Pressing the [SEL] button displays the last displayed
item while the power is supplied.
• No operation for more than 3 seconds also terminates
the SEL menu.
25
SEL Menu
■ Button assignment
Only pressing the [e] or [f] button allows users to assign
the settings in the SEL menu while an image is displayed.
How to assign settings
z Call up the screen of the setting to be assigned in the
SEL menu to a button.
x Hold down both of the [SEL] and [FREEZE (MENU)]
buttons simultaneously while the screen is displayed
until the displayed contents disappear.
c Use the [e] or [f] button to display and assign the
settings to be stored.
Note:
• If "ZOOM" is assigned to a button, zoom can be adjust-
ed in the image freezing state (☞ page 24).