Panasonic HC-V500M Camcorder User Manual


 
60
VQT3W31
To adjust the brightness of the Photo light
If the [AF ASSIST LAMP] is set to [AUTO] (l 76) and the Photo light is set to
([AUTO]) or ([OFF]), the Photo light will turn on when taking pictures at a dark place to
make the focusing easier.
If the indication etc. flashes when the button is pressed halfway, the Photo light
is not activated.
The subject should be within 1.2 m (3.9 feet) of the unit.
When the Photo light flashes, the shutter speed is adjusted automatically by determining
the ambient brightness.
It may not flash when the LED light is very hot.
Reduces the phenomena where human eyes become red from Photo light.
The Photo light is activated 2 times.
The red-eye phenomenon tends to appear in certain recording conditions and more with
some people than with others.
When faces are detected in the Intelligent Auto Mode, the Red-Eye Reduction is set to on.
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one setting in the following order:
Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting canceled
When you press the button, Ø10 or Ø2 flashes for the set period before a still picture
is recorded. After recording, the Self-timer is canceled.
In Auto Focus Mode, if the button is pressed halfway once and then fully, the lens
focuses on the subject when the button is pressed halfway. If the button is pressed
fully all at once, the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
Setting the Self-timer to Ø2 is a good way to prevent image shake when the button is
pressed while using a tripod etc.
: [PICTURE] # [PHOTO LIGHT LEVEL] # desired setting
: Much brighter
: Normal
: Less bright
Red-Eye Reduction
Self-timer
MENU
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 60 ページ 2012年1月16日 月曜日 午前11時21分