Panasonic HC-V500M Camcorder User Manual


 
72
VQT3W31
When recording, the input level from the built-in microphones can be adjusted.
1 Select the menu.
2
(When [SETr ]/[SET] is selected)
Touch / to adjust.
Touch to activate/disactivate AGC. When AGC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to set the microphone input level and then touch [EXIT].
(Microphone input level meter) appears on the screen.
When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
You cannot record with the audio completely muted.
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SETr ]/[SET]: The desired recording level can be set.
MENU
A Left
B Right
C Microphone input level
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 72 ページ 2012年1月16日 月曜日 午前11時21分