Filter
Top Products
- 117 -
∫ Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting a Composite video cable (commercially-available).
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to .
1 Connect this unit to a video device and start playback on this unit.
2 Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
≥ If the date and time display and function indication are not wanted, cancel them before dubbing.
(l 32, 101)
Dubbing in standard picture quality
Change the video input on the
video device and TV that this
unit is connected to.
≥ The channel set will differ depending on
the terminal to which the unit is
connected.
≥ See the operating instructions of the
video device for details.
≥ Insert the plugs as far as they will go.
A Composite video cable (commercially-
available)
If the dubbed images are played back on a wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction for the device you are connecting to or read the
operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
A/V