- 70 -
Message is displayed when this unit is moved rapidly.
When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.
≥ Set to [OFF] to turn off the message indication.
≥ Message will not appear while pausing the recording. (Message will appear even if it is pausing
the recording if [DEMO MODE] is set to [ON].)
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode. (l 48)
≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect, / /
/ is displayed.
≥ When [Normal] is set, will be displayed on the screen.
≥ This function’s default setting is [Normal].
≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceler] is
set to [Strong], and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ If wind sound cannot be reduced with the Wind Noise Canceler function alone, set [BASS
SETTING] to [LOWCUT]. (
l 73)
≥ This function cannot be set when using an external microphone.
This function reduces the low-pitched sound when using an external microphone.
≥ Switch to Manual Mode. (l 48)
≥ This function can be set only when using an external microphone.
[SHOOTING GUIDE]
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
[Wind Noise Canceler]
: [RECORD SETUP] # [Wind Noise Canceler] # desired setting
[Strong]: When a strong wind is detected, this option effectively reduces the
wind noise by minimising the low-pitched sound.
[Normal]: This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]: Cancel the setting.
[LOWCUT]
: [RECORD SETUP] # [LOWCUT] # [ON]
MENU
MENU
MENU