Filter
Top Products
- 153 -
You can view and change this unit’s device name (SSID), which is used for operating this unit as a
wireless access point.
1 Touch [INPUT], and enter the desired device name (SSID).
≥ Input up to [20] characters are recommended. All the characters cannot be confirmed when
displaying the Device names on this unit if a long Device name is used. (l 133)
≥ For details on how to enter characters,
refer to page 65.
2 Touch [EXIT].
≥ If you are going to connect directly to a smartphone after changing the device name (SSID), set
the connection again with the changed device name (SSID) (l 133).
≥ The Password entered during the setting of direct connection cannot be changed. (l 133)
You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet
Mask] and [MAC Address].
≥ If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL],
you can set each item. Select the item you want to set, and set it.
≥ [MAC Address] cannot be changed.
[Device Name]
[IP Address/DNS
Settings]
[IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address]