Filter
Top Products
- 165 -
When [Wi-Fi] is selected
≥ If you are using an Android device, start up the smartphone application “Image App”.
1
(If the device is Android)
On the smartphone, select [Wi-Fi], and select the SSID displayed on this unit.
(If the device is iOS)
On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
2
(If the device is Android)
Enter the Password displayed on this unit.
(If the device is iOS)
After entering the Password displayed on this unit, start up the
“Image App”.
3 Follow the on-screen instructions of the smartphone to set up a connection.
≥ When the settings is complete, the smartphone and this unit are connected directly, allowing you
to use remote operations. (l 136)
Connecting to a wireless access point
Check if the wireless access point you are using is compatible with WPS
jIf the wireless access point is compatible with WPS:
Proceed to the following [WPS Connection]
jIf the wireless access point is not compatible with WPS:
[Searching for wireless access points to set up a connection] (l 166)
1 Press Wi-Fi button.
≥ When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], and
proceed to step 5.
2 Touch [Wi-Fi Setup].
3 Touch [Wireless Settings].
4 Touch a Blank row.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Wireless Settings] on page 174.
5 Touch [WPS Connection].
6 Set the wireless access point to waiting for WPS.
≥ For further details, please read the operating instructions for the
wireless access point. (When using a tethering connection, please
read the operating instructions for the smartphone.)
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch
[EXIT], and set the connection again.
[WPS Connection]
A [Delete]
B [ENTER]