![](http://pdfasset.owneriq.net/8/a8/8a85aec3-0a47-47c1-9da9-43402f49ad28/8a85aec3-0a47-47c1-9da9-43402f49ad28-bg4e.png)
- 78 -
This will change the setting of the Image Stabilizer function to the one appropriate for the recording
when a Wide Conversion Lens (optional) is attached to this unit.
≥ The following functions will not work:
jNight Portrait in Intelligent Auto/Intelligent Auto Plus
jBuilt-in flash
jRed-eye Reduction
jVideo light
jAF ASSIST LAMP
j
Night Mode ([Infrared])
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode. (l 59)
≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect, / /
/ is displayed.
≥ When [Normal] is set, will be displayed on the screen.
≥ This function’s default setting is [Normal].
≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceler] is
set to [Strong], and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ This function cannot be set when using an external microphone.
This function reduces the low-pitched sound when using an external microphone.
≥ Switch to Manual Mode. (l 59)
≥ This function can be set only when using an external microphone.
[WIDE CONV. LENS SET]
: [RECORD SETUP] # [WIDE CONV. LENS SET] # [ON]
[Wind Noise Canceler]
: [RECORD SETUP] # [Wind Noise Canceler] # desired setting
[Strong]: When a strong wind is detected, this option effectively reduces the
wind noise by minimizing the low-pitched sound.
[Normal]: This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]: Cancel the setting.
[LOWCUT]
: [RECORD SETUP] # [LOWCUT] # [ON]
MENU
HC-W850
MENU
MENU