Filter
Top Products
50
VQT2M51
This item is used to start the unit demonstration.
(Only when the mode is at the or position)
If [DEMO MODE] is switched to [ON] when there is no SD card inserted, the demonstration
automatically starts.
//
If [DEMO MODE] is switched to [ON] when there is no SD card inserted and while this unit is
connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take
place for approx. 10 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start the Optical Image Stabilizer demo.
(Only when the mode is at the or position)
Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be canceled.
You can select the language on the screen display and the menu screen.
[DEMO MODE]
[OFF]/[ON]
[O.I.S. DEMO]
[LANGUAGE]
[English]/[Français]/[Español]
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book 50 ページ ２０１０年１月１８日 月曜日 午前１１時３３分