Filter
Top Products
67
VQT2M51
Message is displayed when this unit is moved rapidly.
≥ Change the mode to .
When “CAMERA PANNING IS TOO FAST.” appears,
move the unit slowly while recording.
≥ Set to [OFF] to turn off the message indication.
≥ Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set to [ON].)
≥ In some recording conditions, messages may not appear.
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥ Change the mode to .
≥ Switch to Manual Mode. (l 74)
≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and
the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
Directivity of the microphone is synchronized with the zoom operation. Sounds near the front
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥ Change the mode to .
≥ Switch to Manual Mode. (l 74)
[SHOOTING GUIDE]
: [RECORD SETUP] #
[SHOOTING GUIDE] # [ON]
[WIND NOISE CANCELER]
: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
[ZOOM MIC]
: [RECORD SETUP] # [ZOOM MIC] # [ON]
MENU
MENU
MENU
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book 67 ページ ２０１０年１月１８日 月曜日 午前１１時３３分