87
VQT3B18
Automatic white balance function may not reproduce natural colors depending on the scenes
or lighting conditions. If so, you can adjust the white balance manually.
≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual
Mode. (l 86)
≥ For how to perform the settings when using the viewfinder, refer to page 86.
1 Touch [WB].
2 Touch / to select White
balance mode.
≥ Select the optimal mode by confirming the
color on the screen.
≥ To return to auto setting, set to or
press the iA/MANUAL button again.
∫ To set the white balance
manually
1 Select , fill the screen with a
white subject.
2 Touch and set the blinking .
≥ When using the viewfinder, press and hold
the CAMERA FUNCTION button.
≥ When the screen turns black instantly and
the display stops flashing and then
lights constantly, the setting is complete.
≥ If the display continues flashing, the
white balance cannot be set. In this case,
use other White balance modes.
≥ When the display flashes, the manual
white balance previously adjusted is
stored. Whenever recording conditions
change, re-set the white balance.
≥ When setting both the white balance and
the iris/gain, set the white balance first.
≥ is not displayed on the screen
when is being set.
White balance
Icon Mode/Recording conditions
Auto white balance
adjustment
Sunny mode
Outdoors under a clear sky
Cloudy mode
Outdoors under cloudy sky
Indoor mode 1
Incandescent light, video lights
like in the studio, etc.
Indoor mode 2
Color fluorescent lamps, sodium
lamps in gymnasiums etc.
Manual adjustment mode
≥ Mercury-vapor lamps,
sodium lamps, some
fluorescent lights
≥ Lights used for wedding
receptions at hotels, stage
spotlights in theaters
≥ Sunrise, sunset, etc.
F
IRISSHTRWB
FOCUS
AWB
AWB
AWB
F
IRISSHTRWB
FOCUS
AWB
AWB
HDC-SDT750&TMT750-P-VQT3B18_mst.book 87 ページ 2010年8月20日 金曜日 午後3時53分