Filter
Top Products
Before using
14
LSQT1284
≥The batteries heat up after use or charging. The
main unit of the Camcorder being used will also
heat up. This is normal.
≥Along with the reduction of the battery capacity,
the display will change: # #
# # . If the battery
discharges, then ( ) will flash.
Selecting a mode
(Turning the Camcorder on/off)
When recording, open the lens cover before
turning the unit on. (
-12-) If the unit is turned on
with the lens cover closed, the automatic white
balance adjustment (
-49-) may not function
properly.
Rotate the mode dial to select the desired mode
or OFF.
≥Rotate the mode dial slowly.
ª
How to turn on the power
1
While pressing the lock release button A,
set the mode dial to select the desired
mode.
≥Rotate the mode dial while at the same time
pressing in the lock release button if changing
from OFF to another mode.
≥Align with the mark B.
≥The Status indicator lights red and the power
turns on.
ª
How to turn off the power
1
Set the mode dial to OFF.
≥The Status indicator goes off when the power
turns off.
TAPE RECORDING MODE
Use this when you record the image on
a tape.
TAPE PLAYBACK MODE
Use this to play back a tape.
OFF The power turns off.
A
B
PV-GS90P_LSQT1284_Eng.book 14 ページ ２００７年１１月２８日 水曜日 午前９時２０分