Record mode
24
LSQT1284
Recording on a tape
When recording, open the lens cover before
turning the unit on. (
-12-) If the unit is turned
on with the lens cover closed, the automatic
white balance adjustment (
-49-) may not
function properly.
The default aspect ratio is set to [16:9] for
recording images compatible with a wide-screen
TV. To make this unit compatible with regular TVs
(4:3), change the [ASPECT] setting before
recording the images (
-30-) or change the
[TV ASPECT] setting when watching them on the
connected TV (
-36-).
≥Set to Tape Recording Mode.
1 Press the recording start/stop button to
start recording.
2 Press the recording start/stop button again
to pause recording.
≥For the recording time on a tape, refer to
-13-.
≥Carry out a recording check to verify that the
image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
-25-).
ª
On-screen display in the tape
recording mode
1) Recording time elapse
2) Remaining tape indication
ª
About the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
ª
[POWER SAVE]
[OFF]: When 5 minutes passes without
any operation, the standby mode
will be automatically set. In the
standby mode, [;] blinks and it
takes more time than usual to start
recording after you press the
recording start/stop button.
[5 MINUTES]: When 5 minutes passes without
any operation, the Camcorder
automatically turns off to protect
the tape or to save battery life.
To use the Camcorder, turn it on
again.
≥In the following cases, the power may not turn
off even when set [POWER SAVE] >>
[5 MINUTES].
≥When connecting to the AC outlet
(When using the AC adaptor)
≥When connecting the DV cable to a PC or
other equipment
;
;
R 0:30
R 0:30
R 0:30
0h00m10s00f
0h00m10s00f
0h00m10s00f
1)
2)
PV-GS90P_LSQT1284_Eng.book 24 ページ 2007年11月28日 水曜日 午前9時20分