Filter
Top Products
Operating Instructions
101
6.1.5 Updating the Camera Firmware
The Update Firmware page allows you to update the camera's firmware. If new
firmware is available, install it into the camera.
Note
• Do not turn off the power during a firmware update.
• All buffered images and sensor logs on the internal memory will be
deleted after the firmware update.
• The firmware version is displayed on the Top page and the Status page.
1. Download the new firmware from the Panasonic Network Camera support
website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it
on your PC.
2. Click [Update Firmware] on the Maintenance page.
3. Click [Update Firmware].
• The procedure can take up to 7 minutes.
• The camera restarts. Restart operation takes up to 1 minute.