Filter
Top Products
92
Troubleshooting
1: The power does not turn on.
1-1: Are the battery and the AC adaptor
correctly connected? Check the
connection.
1-2: Is the battery sufficiently charged?
Use a battery that has been
sufficiently charged.
2: As the power is turned on, it turns
off immediately.
2-1: Is the battery charge insufficient to
operate the camera? Charge the
battery or replace it with charged
one.
2-2: Has condensation occurred?
Carrying the digital camera from a
cold place to a warm place could
cause condensation to form inside
the camera. Wait until condensation
disappears.
3: The image cannot be recorded.
3-1: Is the memory card inside?
3-2: The operational mode dial is not set
to REC mode.
3-3: There is no memory capacity left on
the card. Before recording, delete
some images.
4: The image is not displayed on the
LCD monitor.
4: Is the LCD monitor set to off?
5: The LCD monitor is too bright or
dark.
5: Adjust the brightness of the LCD
monitor.
6: The display or images on the LCD
monitor are not focused.
6: Set the REC mode dial to the mode
corresponding to the distance to the
subject.
7: The image cannot playback.
7-1: Is the memory card inside?
7-2: There is no image in the memory
card.
7-3: The operational mode dial is not set
to playback [ ].
8: The image is not displayed on the
television.
8-1: Is the camera correctly connected
with the TV? Check it.
8-2: Set the TV to video input mode.
9: When connecting to PC, images
cannot be transferred.
9: Check that the camera is correctly
connected to the PC.