Filter
Top Products
33
Using the Auto Pop-up Flash
The Built-in Flash enables you to record still pictures in a dark place.
1 Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>
[FLASH] >> [ON] or [AUTO].
≥If [AUTO] is selected, the [ßA] Indication is displayed when in a dark
place and the Video Flash will be lit.
2 Press the [CAMERA STILL] Button.
≥Video Flash 1 pops up and is lit automatically, and the image
becomes still.
3 Press the [PHOTO SHOT] Button or Recording Start/Stop
Button.
≥Flash is not lit, when the Palmcorder is in recording mode.
≥After recording, close the Video Flash by pressing on it.
≥Do not cover the Flash Sensor
2 with your hand during recording.
Adjusting Brightness of the Flash
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> [FLASH LEVEL]
>> a desired Flash Level.
≥For recording under normal conditions, set it to [NORMAL]. (The [ß]
Indication
3 appears.)
≥If the brightness is not enough in [NORMAL] setting, set it to [i] (the [ßi]
Indication appears), if it is too bright, set it to [j] (the [ßj] Indication
appears).
To reduce the “Red Eye” effect
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>
[RED EYE REDUCTION] >> [ON].
≥The [£] Indication
4 appears.
≥Even if the [RED EYE REDUCTION] is set to [ON], you still may get “red
eyes phenomenon” depending on recording conditions.
≥For other notes concerning this item, see 69.
ߣ
43
O
F
F
O
N
M
O
D
E
3
2
3
PHOTO
SHOT
2
1
1
M
E
N
U
CAMERA STILL
PUSH
SHUTTER/IRIS/
VOL/JOG
PV-DV953P.book 33 ページ ２００３年１月１６日 木曜日 午後６時５４分