Filter
Top Products
72
ª Card Playback
(l 45)
≥If a blank (nothing recorded) Card is played, the screen
becomes white and the [NO PICTURE],
[NO MPEG4 DATA] or [NO VOICE DATA] Indication
appears depending on the mode selected.
≥If you attempt to play back if file recorded in a different
format or if file data is defective, the [k] Indication and the
[CARD ERROR] Indication could appear as a warning.
≥In the case of displaying memory images on a Multi
Screen, if there are 7 or more images, they cannot be
displayed all at once. Rotate the [PUSH] Dial or push the
[5] Button to display the next 6 still pictures.
≥When the pictures recorded by another Palmcorder are
played back with this Palmcorder, the size of the pictures
may be different from the recorded size.
≥MPEG4 data or Voice data will not be output from DV
Terminal.
≥MPEG4 data cannot perform Cue/Review Playback, Slow
Motion Playback (forward direction and reverse direction),
Still Advance Playback (forward direction and reverse
direction) or Jog Playback.
≥During automatic copying of tape pictures onto a card, the
remaining number of pictures that can still be recorded on
the Card is displayed. When it becomes [0], the tape is set
to the Recording Pause Mode.
≥For the MPEG4 moving pictures recorded on a camera
other than this camera, “k” may be displayed when they
are played back. If the [1] Button is pressed in this case,
“!” will be displayed for a few seconds and the next image
will be displayed.
≥For the still images recorded on the camera other this
camera, the mega-pixel image size may be displayed.
≥If an MPEG4 motion picture is played continuously for a
long time, the playback may stop in the midway and the
video camera may freeze while a still picture is being
displayed. If this happens, press the [RESET] button.
≥When performing Cue or Review Playback of voice data,
the Playback elapsed time may not correspond to the
actual recording time of the sound
≥When playing back an MPEG4 or voice data recorded by
other equipment, a part of the playback elapsed time may
be indicated as [--].
ª Voice Power Save (l 20)
≥Voice Power Save Function automatically shuts off the
monitor to reduce the power consumption when no
operation is being performed in the Voice Recording Mode.
When [VOICE POWER SAVE] on the
[OTHER FUNCTIONS] Menu is set to [ON], the power
save function is activated, and the screen turns off in a few
seconds after operations, such as play or recording, are
performed.
≥The Voice Power Saving Function is cancelled when any
operation is performed.
≥Do not forget to turn off the power.
ª Copying Pictures from a Memory Card to a
Cassette
(l 46)
≥When recording the Card Images on a Tape, a PhotoShot
index signal is automatically recorded with a picture.
≥Even if you edit the Slide Show, it is not applied to the order
in copying the pictures.
ª Slide Show (l 47)
≥The playback time can be set from 7 to 99 seconds for
[2048k1496], [ ] and [ ] sized pictures, and from 5
to 99 seconds for other sizes.
≥Perform the Slide Show Settings with your own Palmcorder.
≥Depending on the File size, playback may take longer than
the set time.
≥When performing the preset Slide Show after the Titles are
displayed, the Titles disappear.
ª Title Functions (l 48)
≥When the [TAPE/CARD/CARD MODE] Selector is set to
[MPEG4] or [VOICE], Title Creation Function is not
possible.
≥If the [PICTURE SIZE] is set to [2048k1496] and [TAPE/
CARD/CARD MODE] selector is set to [CARD], titles
cannot be created.
≥Even if the contrast of the Title is adjusted, the portions
where there is little difference between light and dark and
where the boundary between light and dark is unclear may
not appear.
≥The Title may not appear clear if something small is used
for it.
≥If you create an original title, the number of pictures that
can be recorded on the Memory Card decreases.
≥If the number of pictures that can be recorded on the
Memory Card is small, you may not be able to create an
original title in some cases.
≥When a title is displayed in VCR Mode, the title is not
output from the DV Terminal or Digital Still Picture
Terminal.
≥When the [TAPE/CARD/CARD MODE] Selector is set to
[MPEG4] or [VOICE], Title In Function is not possible.
≥Regardless of the [PICTURE SIZE] setting, the size of the
created pictures is [640k480].
ª Using your Palmcorder with Digital Video
Equipment (Dubbing)
(l 52)
≥Regardless of the setting, dubbing is carried out
automatically in the same audio recording Mode as that of
the Cassette in the playback-side equipment.
≥The images on the monitor of the recording side may be
disturbed, but it does not affect the recorded images.
≥Even if Playback Digital Effects, Playback Zoom, or
Playback Title In have been used, these effects are not
output from the DV Terminal.
≥Even if you use a device with DV Terminals, you may not
be able to perform digital dubbing in some cases.
≥Date or other information to be displayed cannot be
displayed if the software of the connected equipment does
not support the display function.
ª Using a Card in a Personal Computer
≥To erase pictures that you recorded on the Card by using
the Palmcorder, be sure to erase them on the Palmcorder,
not on the computer.
≥You may not be able to properly play back or search the
images on the Palmcorder after editing the recorded data
or changing the image data on a personal computer.
QXGA
UXG
A
PV-DV953P.book 72 ページ ２００３年１月１６日 木曜日 午後６時５４分