42
LSQT1214
Recording
≥ This function cannot be used in picture
recording mode.
[HDD] [SD]
The zoom microphone is linked to the zooming
operation so that far-away sounds with a tele-
shot and close-up sounds with a wide-angle shot
are recorded more clearly.
¬Rotate the mode dial to select .
Press the MENU button, then select
[ADVANCED] # [ZOOM MIC] # [ON]
and press the joystick.
[HDD] [SD]
You can record yourself while viewing the LCD
monitor.
¬Rotate the mode dial to select or
.
Rotate the LCD monitor towards the
lens side.
The image is horizontally flipped as if you see a
mirror image. (However the image recorded is
the same as a normal recording.)
≥ When the LCD monitor is rotated towards the
lens side, the icon will not be displayed even if
you press the joystick.
≥ Only some indications will appear on the
screen. When [°] appears, return the
direction of the LCD monitor to normal position
and check the warning/alarm indication. (l 91)
[HDD] [SD]
Gain up mode works with the video light to
enhance the light’s brightness and brighten the
natural colours in a scene.
≥ Gain up mode cannot be used in picture
recording mode.
¬Rotate the mode dial to select or
.
Press the LIGHT button.
Each time you press the LIGHT button:
A Video light and gain up mode on (video
recording mode only):
Brighter than when only the video light is on,
but washed out images will appear.
B Video light on:
To eliminate washed out images, use this
mode.
C Video light off
To use the zoom microphone
function
Recording yourself
MENU
Recording with the video
light (SDR-H250)
This built-in video light is for
recording in dark places.
LIGHT
LSQT1214_GN.book 42 ページ 2007年2月8日 木曜日 午後8時50分