80
LSQT1214
With a computer
1 Connect this unit and a
computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
The USB function selection screen will appear.
2 Select [PC CONNECT] # [HDD]
or [SD CARD] and press the
joystick.
This unit is automatically recognised by the
computer.
≥ When the unit is connected to a computer,
its power cannot be turned off.
In this case, disconnect the USB cable (l 81).
≥ When a computer is accessing the HDD or
card in this unit, the ACCESS/PC lamp or card
access lamp lights. ( or appears on
the LCD monitor.) Do not disconnect the USB
cable or AC adaptor while the HDD or card is
being accessed as it may damage the data.
≥ The HDD and card cannot be accessed
simultaneously.
≥ It may be necessary to reboot the computer
after connecting this unit to it for the first time.
When the unit is connected to a computer, it is
recognised as an external drive.
≥ This unit supports only the readout of data
using the computer. The computer cannot write
data to the unit, or erase data from the unit.
≥ Depending on the operating environment of the
computer, the shape of the drive icon and the
drive name (Example: E:) will differ.
∫ Drive icons
The icon is displayed in [My Computer].
When accessing the HDD
≥ Windows XP:
≥ Windows 2000:
When accessing the card
≥ Windows XP:
≥ Windows 2000:
∫ Example folder structure
HDD
About the computer display
A
LSQT1214_GN.book 80 ページ 2007年2月8日 木曜日 午後8時50分