Panasonic SDR-H250GN Digital Camera User Manual


 
68
LSQT1214
HDD and card management
HDD and card management
HDD management
[HDD]
Please be aware that if the HDD is formatted,
then all the data recorded on the HDD will be
erased. Store important data on a computer, etc.
¬Rotate the mode dial to select .
¬Select [HDD] in [MEDIA SELECT].
1 Press the MENU button, then
select [SETUP] #
[FORMAT HDD] # [YES] and
press the joystick.
2 When the confirmation message
appears, select [YES], then press
the joystick.
When formatting is complete, press the MENU
button to exit the message screen.
During formatting, do not turn this unit off.
When you format the HDD, use a battery with
sufficient battery power or the AC adaptor.
During formatting, do not cause any vibrations
or impacts to this unit.
[HDD]
Information concerning the space used and
remaining on the HDD is displayed.
¬Rotate the mode dial to select .
¬Select [HDD] in [MEDIA SELECT].
Press the MENU button, then select
[SETUP] # [HDD STATUS] # [YES]
and press the joystick.
To exit the information screen
Press the MENU button.
The 30 GB hard drive utilizes a portion of the
storage space for formatting, file management
and other purposes. 30 GB is 30,000,000,000
bytes. Usable capacity will be less.
Card management
[SD]
Please be aware that if an SD card is formatted,
then all the data recorded on the card will be
erased. Store important data on a computer, etc.
¬Select [SD CARD] in [MEDIA
SELECT].
1 Press the MENU button, then
select [SETUP] #
[FORMAT CARD] # [YES] and
press the joystick.
Formatting HDD
This is for initializing HDD.
Displaying HDD information
MENU
Formatting an SD card
This is for initializing cards.
MENU
MENU
LSQT1214_GN.book 68 ページ 2007年2月8日 木曜日 午後8時50分