Filter
Top Products
10 LSQT1426 11LSQT1426
Quick guide
2
Open the card/battery
door.
Open the door by sliding the card/
battery door lever to the “OPEN”
position.
3
Insert the battery.
4
Close the card/battery
door.
Close the card/battery door and
slide the card/battery door lever to
the “LOCK” position.
1
Set the mode dial to
[OFF].
5
Connect the AC adaptor
(supplied).
To AC outlet
Small gap here.
AC adaptor
AC cable
6
Open the terminal cover.
7
Plug the DC plug into the
DC input terminal on the
unit.
1
Set the mode dial to
a position other than
[OFF].
2
Select [YES].
3
Set the date and time.
To select settings To change
numerical values
4
Enter the date and time.
This procedure is for setting the
date and the time the very first
time. For the setting procedure for
the second and subsequent times
(P.28).
•
Status indicator
Flashing red: Charging in
progress
Off: Charging complete
Charging
Setting the date and time
Press until hearing lever lock.
Lever
Inserting SD cards
(sold separately)
Place label upwards.
Slide straight in until hearing card catch.