Filter
Top Products
-11-
!4 Alarm Output Terminal (ALARM OUT/GND)
Connects to the alarm input connector (terminal) of
an external device. When the camera detects
motion, the alarm output signal is supplied to the
connected external device (Open collector output:
16 V DC, 100 mA max).
!5 Day/Night Input Terminal (DAY/NIGHT IN/GND)
This terminal is used for connecting the camera to
an external day/night detecting sensor.
!6 AC Inlet Socket
Plug the power cord (supplied as a standard
accessory) into this socket and connect it to an AC
outlet.
!7 AC/DC Compatible Input Terminal
(DC 12V IN/AC 24V IN, GND)
This terminal is for connecting the 12 V DC or 24 V
AC power supply cord.
Caution: Connect to 12 V DC (10.8 V-16 V) or 24 V
AC (19.5 V-28 V) class 2 power supply only. Be
sure to connect the grounding lead to the GND
terminal when the power is supplied from a 24 V
AC power source.