Filter
Top Products
2. SETUP OPERATION
This camera utilizes a user setup menu (CAM SET UP)
that is displayed on the monitor.
To set items on the CAM SET UP menu, use the follow-
ing buttons on the side panel.
Up Button (J): Moves the cursor upwards. Use
this button to select an item or
adjust the parameters.
Down Button (K): Moves the cursor downwards. Use
this button to select an item or
adjust the parameters.
Right Button (M): Moves the cursor to the right. Use
this button to select or adjust the
parameters of the selected item.
The parameter changes each time
this button is pressed.
-21-
Left Button
Set Button
Right Button
Down Button
Up Button
Left Button (L): Moves the cursor to the left. Use
this button to select or adjust the
parameters of the selected item.
The parameter changes each time
this button is pressed.
Set Button (I): Executes selection and displays a
submenu for an item with N mark.
• To reset the parameter of an item to the factory
default setting, move the cursor to that row and
press L and M simultaneously.
• To return to the previous menu or page, move the
cursor to RET and press I.
• To close the setup menu, move the cursor to END
and press I.
• All Reset Operation
All reset allows you to reset all adjustments and para-
meters to the factory default settings.
(1) Make sure that the setup menu is not displayed (a
camera picture is displayed).
(2) While pressing both L and M, press I for a
few seconds. The message ALL RESET momentari-
ly appears on the monitor.