Panasonic WVCP304 Security Camera User Manual


 
25
L Default resetting [CAMERA RESET]
The settings in the setup menu are restored to the default settings.
Move the cursor to "PUSH SET" of "CAMERA RESET" and hold down the [SET] button for
more than 2 seconds to enter the next screen. To return to the previous screen without reset-
ting, move the cursor to “NO” and press the [SET] button. To restore the default settings, move
the cursor to "YES" and press the [SET] button.
Note:
•Thedataoftheregistered pixel compensation points is not cleared.
•Tosetwhethertoresetthecamera,select“YES”or“NO”byusingthe[SET]button.Toset
with a controller, refer to the instruction manual of the controller.
MSerialnumberviewing[SER.NO.]
Displays the serial number of this product.