Panasonic WVCP304 Security Camera User Manual


  Open as PDF
of 28
 
6
Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
Note:
• Ifthetop screenof thesetupmenuis
called up with the operation buttons
while the camera is operated, the setup
mode is always "DISABLE" to prevent
operation errors.
To perform settings in the setup menu,
change the setup mode to "ENABLE".
• Thecursorisareverselyhighlightedpart.
Step 4
Perform the settings for each item.
• Selectionofsettingitem:
Press the [UP] button or [DOWN] button
to move the cursor.
• Changeofsettings:
Press the [RIGHT] button or [LEFT] button.
• Displayofadvancedsetupscreen:
Press the [SET] button when “
” is
attached to the target setting item.
• Returntoprevioussetupscreen:
Move the cursor to "RET" and press the
[SET] button.
• Returntothetopscreen:
Move the cursor to "TOP" and press the
[SET] button, to display the top screen of
the setup menu.
Step 5
Move the cursor to “END” and press the
[SET] button to return to the camera image
screen, or wait about 5 minutes and the
setup menu will automatically close.
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO1
VMD
RET TOP END
D&N(IR)
OFF
 previous next