Panasonic WV-CP500 Security Camera User Manual


  Open as PDF
of 32
 
17
v The video output cable is connected to this video output connector.
Important:
• Besuretoturnoffthepowerofeachdevicebeforeconnection.
• Besuretosecurethecoaxialcableconnectors.
Connect a coaxial cable to the video output connector.
b Use a cable tie (locally procured) to attach the coaxial cable to the camera mount
bracket.
Important:
• Thecabletieshallbemadeofmetallicordurablematerialtobestrongenoughbecause
the tie plays the role of camera drop prevention measures in case.
• Whenthecameramountbracketismountedonawall,besuretoobservethemounting
height described on the illustration above.
POWER
ALARM OUT
ALARM IN
GND
VIDEO OUT
120V ~ 60Hz
To video input
Coaxial cables
WV-CP500
Camera mount
bracket (option)
The cable shall be
tied to the camera
mount bracket to
avoid slack.
The cable shall be
tied to the camera
mount bracket to
avoid slack.
Camera mount
bracket (option)
More than
270 cm {8.9'}
<Installation sample on a ceiling> <Installation sample on a wall>
Floor
 previous next