Filter
Top Products
24
Screenshot 2
The setup mode changes to "ENABLE", and
the setup menu becomes ready to be set.
Step 3
Move the cursor to the item to be set, and
press the setting button.
Screenshot 1
Hold down the setting button for approx. 2
seconds to call up the top screen of the
setup menu.
Step 1
Press the up button or the down button to
move the cursor to "END".
Step 2
Press the right button to move the cursor to
"SETUP", and press the setting button to
change the setup mode from "DISABLE" to
"ENABLE".
MODEL WV-CP500 SERIES
CAMERA ID OFF
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END SETUP DISABLE
MODEL WV-CP500 SERIES
CAMERA ID OFF
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END SETUP ENABLE
Basic operation
The description below explains how to operate the setup menu basically.
The operations in the setup menu are performed with the operation buttons (☞ pages 9 and
10) after calling up the setup menu on the connected video monitor.
The operations in the setup menu can also be performed through the system controller (option).