Panasonic WV-NW470S Security Camera User Manual


 
-30-
You can reset the following data back to the factory
default settings.
Camera Setup
Setup Menu (PC oriented)
HTML files
Initializing the Camera Menu
Move the cursor to CAMERA RESET.
Hold down [Left], [Right], and [SET] buttons simulta-
neously for 2 seconds on the camera, or click the All
Reset button on your computer display.
Initializing the Setup Menu
In the power-on state, press the [Up] and [Down]
buttons simultaneously while holding down the but-
ton A.
Hold down the button A for 15 seconds. It will take
about 10 seconds to complete the initializing. Be
sure to continue supplying power to the camera
while initializing.
Notes:
Clock calibration is required even after initializing
the setup menu.
Try again if the previous initializing failed.
Initializing HTML Files
In the power-on state, press the side panel buttons,
[Up] and [Down] simultaneously while holding down
the button B.
Hold down the button B for 15 seconds. It will take
about 10 seconds to complete the initializing. Be
sure to continue supplying power to the camera
while initializing.
Notes:
Never press both the buttons A and B at a time.
Try again if the previous initializing failed.
INITIALIZING