Panasonic WV-SF130 Series Security Camera User Manual


 
Note
When “On” is selected, notification of the alarm occurrence will be provided to the registered destination
server addresses in order (to IP address 1 first, to IP address 8 last).
[Additional alarm area data(VMD)]
Determine whether or not to send notifications for the alarm area number of VMD alarm with the Panasonic
alarm protocol by selecting On/Off.
Default: Off
[Destination port]
Select a destination port for the Panasonic alarm protocol from the following.
Available range: 1 - 65535
Default: 1818
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443
*1
, 995, 10669, 10670
[Retry times]
Select a retry time for the Panasonic alarm protocol.
Available range: 0-30
Default: 2
Destination of notification
[Address 1] - [Address 8]
Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Host name
is unavailable for the IP address. Up to 8 destination server addresses can be registered.
[Alarm] checkbox: When the checkbox is selected, the Panasonic alarm notification will be provided upon
an alarm occurrence.
[Diag.] checkbox: When the checkbox is selected, notification using Panasonic alarm protocol will be
provided in the following cases.
When notification of the remaining capacity of the SD memory card has been provided
*2
When the SD memory card has become full
*2
When the SD memory card cannot be recognized
*2
[Destination server address]: Enter the destination server address or host name.
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).
Default: None (blank)
To delete the registered destination server address, click the [Delete] button respective to the desired
destination server address.
IMPORTANT
When entering the host name of the “Destination server address”, the DNS settings on the [Network]
tab of the “Network” page must be configured. (®page 163)
Confirm that the destination IP addresses are registered correctly. When a registered destination does
not exist, notification may be delayed.
*1
SW355
SW355
SW352
SW352
SW316L
SW316L
SW316
SW316
SW314
SW314
*2
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
NP502
NP502
SW115
SW115
148 Operating Instructions
13 Configure the alarm settings [Alarm]