Panasonic WV-SF130 Series Security Camera User Manual


 
11.3 Configure the settings relating to JPEG images
[JPEG/H.264] (or [JPEG/MPEG-4])
Note
SW155, SW152, SW115, SF135, SF132, SP105, and SP102 do not support MPEG-4.
Click the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab) on the “Image/Audio” page. (®page 42, page 44)
JPEG
Configure the settings such as “Refresh interval (JPEG)*”, “Image capture size” and “Image quality” on this
section. Refer to page 79 and page 86 for further information about the settings relating to H.264 (or
MPEG-4) images.
“Live” page (Initial display)
Configure the settings relating to the JPEG images displayed on the “Live” page.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image from the following.
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SW314
SW314
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
SF135
SF135
SF132
SF132
SP105
SP105
SP102
SP102
SW115
SW115
:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*
Default: 5fps
NP502
NP502
:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps/ 10fps/ 12fps*/ 15fps*/ 30fps*
Default: 10fps
Note
When “On” is selected for “H.264 transmission” (or “MPEG-4 transmission”), the refresh interval may
be longer than the set value when any value with an asterisk (*) on the right is selected.
Depending on factors such as the network environment, the resolution, the image quality, or the number
of computers concurrently accessing the camera, the transmission interval may be longer than the set
value.
If images are not delivered in the specified transmission interval, you can make the images be delivered
closer to the specified time by lowering the resolution or image quality.
Operating Instructions 77
11 Configure the settings relating to images and audio [Image/Audio]