Panasonic WV-SF130 Series Security Camera User Manual


 
Alarm permission
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
NP502
NP502
: Alarm input (terminal alarm) will be received during the period of the
schedule.
VMD permission: The video motion detection (VMD) function will be active during the period of the
schedule.
Access permission: Users whose access level is set to 2 and 3 on the “User auth.” tab
(®page 153) can access the camera only in the period of schedule.
H.264 recording
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
NP502
NP502
SW115
SW115
: The SD recording will be performed at the
designated time in the schedule.
Forcible black & white mode
SW316L
SW316L
: During the period of the schedule “Day & Night(IR)” will
operate in “On”. The IR LED Light lights when “Auto(High)”, “Auto(Mid)”, or “Auto(Low)” is set for “IR
LED Light”. (®page 93)
Note
Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (®page 153) and “Off” for
“Host auth.” on the “Host auth.” page (®page 154) to validate “Access permission”.
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
NP502
NP502
SW115
SW115
:
When selecting “H.264 recording”, select “H.264” for “Recording format” on the [SD memory
card] tab and select “Schedule” for “Save trigger”. (®page 53)
SW316L
SW316L
:
When using “Forcible black & white mode”, set “Terminal 1” on the “Alarm” tab to a setting other
than “Black & white input”.
2. Select days of a week by checking the respective checkboxes.
3. From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of “24h”.
4. Click the [Set] button after completing the settings.
The result will be displayed at the bottom of the window.
Note
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
198 Operating Instructions
18 Configure the settings relating to the schedules [Schedule]